grazie per le risposte...
quindi per le memorie opptero per un'altro anco vitesta uguale....
le due nf7 non sono rev 2.0 cmq vi eleco i dettagli...
ABIT NF7-S2G (SockA) NF2 FSB400,SAta,Raid,au6CH
CPU
Supports AMD-K7 Socket A 266/333/400 MHz FSB CPU
Supports AMD Sempron CPUs (Please update the latest BIOS version)
Chipset
NVIDIA nForce2 Ultra 400 chipset with MCP RAID
Integrated 128-bit memory controller
Supports Advanced Configuration and Power Management Interface (ACPI)
Accelerated Graphics Port connector supports AGP 8X/4X (0.8V/1.5V)
Supports NVIDIA System Utility (NVSU)
Memory
Three 184-pin DIMM sockets
Supports 2 DIMM Un-buffered DDR 400 (Max. 2 GB)
Supports 3 DIMM Un-buffered DDR 333 (Max. 3 GB)
SATA 150 RAID
Support SATA 150 NV RAID
Support 2 channels SATA 150 RAID 0/1
Audio
6-Channel AC 97 CODEC on board
GbE LAN
On board 10/100/1000M LAN
ABIT Engineered
ABIT SoftMenu™ Technology
ABIT FanEQ™ Technology
ABIT CPU ThermalGuard™
ABIT FlashMenu™
Internal I/O Connectors
AGP 8X/4X slot, 5 PCI slots
Floppy Port supports up to 2.88 MB
2 x Ultra DMA 33/66/100/133 Connectors
2 x SATA 150 Connectors
2 x USB headers, 1 x CD-IN, 1 x AUX-IN
Back Panel I/O
1 x PS/2 Keyboard, 1 x PS/2 mouse
1 x Serial Port connectors, 1 x Parallel Port connector
Audio connectors (Front Speaker, Line-in, Mic-in, Center/Sub, Surround Speaker)
4 x USB, 1 x RJ-45 LAN Connector
Miscellaneous
ATX form factor
Hardware monitoring – Including Fan speed, Voltages, System environment temperature
ABIT NF7 (SockA) nFORCE2 Dual DDR400,au6CH,LAN
CPU
Ready for AMD 400FSB Processors
Supports AMD-K7 Duron / Athlon / Athlon XP/Barton FSB 200/266/333 MHz Processors
Chipset
NVIDIA nForce™2 SPP chipset with MCP
Supports Advanced Configuration and Power Management Interface (ACPI)
Accelerated Graphics Port connector supports AGP 8X/4X (0.8V/1.5V)
Dual DDR
Dual DDR architecture combines two independent 64-bit memory controllers
Dual DDR400 provides up to 6.4GB/s bandwidth for system memory
Memory
Three 184-pin DIMM sockets
Supports 3 DIMM DDR 200/266/333 (Max. 3 GB)
Supports 2 DIMM DDR 400 (Max. 2 GB)
Audio
6-Channel AC 97 CODEC on board
Professional digital audio interface supports optical S/P DIF Out
LAN
On board 10/100Mb LAN Physical layer interface
ABIT Engineered
SoftMenu™Technology
ABIT MaxFID™Technology
ABIT CPU TermalGuard™
Internal I/O Connectors
1 AGP, 5 PCI slots
Floppy Port supports up to 2.88 MB
2 x Ultra DMA 33/66/100/133 Connectors
2 x USB 2.0 headers
1 x CD-IN, 1 x IrDA
Back Panel I/O
1 x PS/2 Keyboard, 1 x PS/2 mouse
2 x Serial, 1 x Parallel
1 x S/P DIF Output
Audio connectors (Front Speaker, Line-in, Mic-in, Center/Sub, Surround Speaker)
2 x USB, 1 x RJ-45 LAN Connector
Miscellaneous
ATX form factor
Hardware monitoring - Including Fan speed, Voltages, System environment temperature
qual'è migliore tra le due... oppure sapete dove posso trovare quella rev 2.0 d un prezzo raggionevole... postatemi il link in privato...
grazie..
Inviato: 21 ago 2005, 18:30
) la si può ancora trovare in alcuni shop alla modica cifra di €63, in privato il link. Bye 
oppure cambiare e cercare qualcosa di più adattoa un socket A, cioè frequenza più bassa 400MHz bastano ma timings migliori, ci sono in commercio memorie 2-2-2-5 della corsair, G.Skill, OCZ, Geil... cerca l'offerta migliore, piazza la tua vitestae fai il cambio. A te la scelta. Probabilmente le prestazioni migliori le ottieni con la seconda opzione
