AMD Planet

La scheda madre Chaintech Zenith modello VNF3-250, formato ATX offre supporto per processori AMD Athlon 64 HyperTransport. Il chipset nVIDIA nForce3 250 consente di gestire il bus di sistema fino a 1.6Ghz e memorie DDR 400Mhz da 184 pin su tre slot di espansione per un massimo di 3GB di Ram. L'espandibilità è garantita anche grazie a 5 slot PCI, 1 slot AGP 8X e un CMR(Chaintech Mulmedia Riser) per Chaintech Multimedia Card (CMC5.1). On board il sistema AC'97, dotato di ben 6 canali audio con supporto S/PDIF out. La scheda gestisce, oltre alla porta per floppy drive, 4 periferiche IDE con interfaccia Ultra ATA133 e 2 controller SATA. Le porte I/O sono: 2 porte PS/2 per tastiera e mouse, 2 seriali, 1 parallela, Lan 10/100, e porte audio/game. USB 2.0: 4 porte posteriori integrate + 2 supplementari collegabili sulla MotherBoard.

Caratteristiche

Form Factor ATX Form Factor 305mm x 220mm

CPU Supports the new generation of AMD Socket754 Athlon 64 CPU

Processor interface via 6.4GB/s Hyper Transport bus

Chipset NVIDIA nForce3 250

Main Memory Three 184-pin DDR DIMMs up to 3GB

Supports DDR266/333/400 modules

Expansion Slots One AGP slot for both 4X/8X AGP

Five 32-Bit PCI slots (v2.2 compatible)

One CMR(Chaintech Mulmedia Riser) for Chaintech Multimedia Card (CMC5.1)

Audio Subsystem With external high quality 5.1-Channel AC'97 Codec

Complete software driver supports for Windows OS

Support S/PDIF out

Video Subsystem 4X/8X AGP

UltraDMA IDE Ports Build-in nForce3 250 supports 2 ATA66/100/133 IDE ports

FDD One FDD connector supports up to 2.88MB

Embedded USB Controller Build-in nForce3 250 supports total 6 USB2.0 ports with High-Speed Device@480 Mb/s Transfer Rate

Embedded system monitoring 2 temperature sensing for CPU and system

3 Fan speed monitoring (CPU, system and Chipset)

Boot-Block Flash ROM Award system BIOS supports PnP, APM, DMI, ACPI, & Multi-device booting features

Software Driver CD

Value Pack 2004

Other Feature Rear panel I/O ports
One PS2 Mouse and Keyboard port
Four USB ports and one RJ45 connector
Two 9-pin D-Sub male Serial ports
One 25-pin D-Sub female Parallel port
Audio I/O jacks (Line-in, Line-out and Mic-in)
On-board Ethernet

On-board LAN controller RTL8100C supports 10/100Mb Fast Ethernet
On-board SATA RAID Controller

Build-in nForce3 250 supports 2 Serial ATA devices for the highest data transfer rates (1.5Gbps burst) with RAID 0/1 solution
On-board VIA VT6306 IEEE1394 Host Controller


Four 3x1 pin fan connectors
5x2 pin USB connector for additional 2 USB ports
3x1 pin wake on LAN connector with housing
3x1 pin wake on Modem connector with housing
Two 4x1 pin CD-in connectors with housing on CMC5.1
4x1 pin Aux-in connector with housing on CMC5.1
9x2 pin front panel connector
5x2 pin front side audio connector
20 pin ATX Power connector
4 pin ATX 12V Power connector

A T T E N Z I O N E : NON AGGIORNARE IL BIOS CON RELEASE "BETA" POICHE CIO' CAUSA IRREPARABILI E PERMANENTI DANNI SULLA MAINBOARD