Lucky Star 5VPX2 e AMD K6-2 333/350
Inviato: 01 mag 2004, 10:35Sto cercando di sfruttare al massimo delle sue capacità un vecchio pc che usano prevalentemente le mie bimbe per giocare (ovviamente con giochi adatti alla macchina...) e la mia domanda è questa: secondo voi è possibile montare su una mobo Lucky Star 5VPX2 un AMD K6-2 333 o 350 (sul manuale si parla al massimo di K6-2 300)?
Al momento la mobo monta un K6 300: ci sarebbe un grande "salto di qualità" montando uno dei processori di cui sopra?
Ultima domanda: avete idea di dove potrei trovare del moduli di ram adeguati per incrementare la memoria (attualmente 64Mb)?
Le caratteristiche della mobo sono queste:
Manufacturer Lucky Star
Model 5VPX2 "Aries"
Chipset VIA Apollo VP2
Cpu Socket 7/ 321 Pins for CPU
1. Intel Pentium P54C/ 55C CPU speed 75- 233 MHz processors
2. Cyrix 6x86/6x86L/6X86 MX /MII
3. AMD K5/K6/K6-2 processors
Cpu Voltage 2.2, 2.8, 2.9, 3.3, 3.5
Bus Clock 50, 55, 60, 66, 75 MHZ
Multipliers 1.5x, 2x, 2.5x, 3x, 3.5x, 4x, 4.5x, 5x
Socket 7
Cache Support 256K/512K synchronous PB SRAM (coast slot)
Bios Award
Memory Support synchronous DRAM using 168-pin DIMM modules of 8,16,32
Take up to 256MB RAM in one bank using 72-pin SIMM modules of 1,2,4,8, 16,32,64 or 128MB with supports for EDO,BEDO or Fast Page mode memory
Dimm 2
Simm 2
Pci slot 4
Isa slot 3
AMR none
Agp none
PS/2 mouse
Usb 2
Irda 1
SCSI NCR810 Support
I/O 1. Integrated Enhanced PCI local bus IDE controller with two connectors support Up to four IDE devices such as Hard disk, CD-ROM.
2. Integrated ITE IT8661F/RF multi I/O chipset that offer two 16550 UART compatible serial ports, one EPP/ECP capable port, one IR port, and one Floppy Disk Drive connector.
Form Factor * PCB size : 22 x 24 cm.
Flash Eeprom *Supports 128KB Flash ROM
Power AT/ATX
Special Features 1. A CPU interface controller
2. Avanced cache controller
3. Integrated DRAM controller
4. Asynchronous/synchronous PCI local bus interface
5. Integrated power management unit
6. Internal keyboard controller
7. Real-time Clock.
Grazie a tutti...
Al momento la mobo monta un K6 300: ci sarebbe un grande "salto di qualità" montando uno dei processori di cui sopra?
Ultima domanda: avete idea di dove potrei trovare del moduli di ram adeguati per incrementare la memoria (attualmente 64Mb)?
Le caratteristiche della mobo sono queste:
Manufacturer Lucky Star
Model 5VPX2 "Aries"
Chipset VIA Apollo VP2
Cpu Socket 7/ 321 Pins for CPU
1. Intel Pentium P54C/ 55C CPU speed 75- 233 MHz processors
2. Cyrix 6x86/6x86L/6X86 MX /MII
3. AMD K5/K6/K6-2 processors
Cpu Voltage 2.2, 2.8, 2.9, 3.3, 3.5
Bus Clock 50, 55, 60, 66, 75 MHZ
Multipliers 1.5x, 2x, 2.5x, 3x, 3.5x, 4x, 4.5x, 5x
Socket 7
Cache Support 256K/512K synchronous PB SRAM (coast slot)
Bios Award
Memory Support synchronous DRAM using 168-pin DIMM modules of 8,16,32
Take up to 256MB RAM in one bank using 72-pin SIMM modules of 1,2,4,8, 16,32,64 or 128MB with supports for EDO,BEDO or Fast Page mode memory
Dimm 2
Simm 2
Pci slot 4
Isa slot 3
AMR none
Agp none
PS/2 mouse
Usb 2
Irda 1
SCSI NCR810 Support
I/O 1. Integrated Enhanced PCI local bus IDE controller with two connectors support Up to four IDE devices such as Hard disk, CD-ROM.
2. Integrated ITE IT8661F/RF multi I/O chipset that offer two 16550 UART compatible serial ports, one EPP/ECP capable port, one IR port, and one Floppy Disk Drive connector.
Form Factor * PCB size : 22 x 24 cm.
Flash Eeprom *Supports 128KB Flash ROM
Power AT/ATX
Special Features 1. A CPU interface controller
2. Avanced cache controller
3. Integrated DRAM controller
4. Asynchronous/synchronous PCI local bus interface
5. Integrated power management unit
6. Internal keyboard controller
7. Real-time Clock.
Grazie a tutti...