Ho aumentato da BIOS la CPU Speed a 2200...non è cambiato niente...al post scirve 2500+, ho cambiato anche CPU Ext Freq (da 166/33 a 200/33) non è cambiato niente... Ho CPU bloccata o io sono tonto?
CPU(s)
Number of CPUs 1
Code Name Barton
Specification AMD Athlon(TM) XP 2500+
Family / Model / Stepping 6 A 0
Extended Family / Model 7 A
Core Stepping
Technology 0.13 µ
Supported Instructions Sets MMX, Extended MMX, 3DNow!, Extended 3DNow!, SSE
CPU Clock Speed 1822.6 MHz
Clock multiplier x 11.0
Front Side Bus Frequency 165.7 MHz
Bus Speed 331.4 MHz
L1 Data Cache 64 KBytes, 2-way set associative, 64 Bytes line size
L1 Instruction Cache 64 KBytes, 2-way set associative, 64 Bytes line size
L2 Cache 512 KBytes, 16-way set associative, 64 Bytes line size
L2 Speed 1822.6 MHz (Full)
L2 Location On Chip
L2 Data Prefetch Logic yes
L2 Bus Width 64 bits
Mainboard and chipset [/color]
Motherboard manufacturer ASUSTeK Computer INC.
Motherboard model A7V600, REV 1.xx
BIOS vendor Award Software, Inc.
BIOS revision ASUS A7V600 ACPI BIOS Revision 1004
BIOS release date 07/24/2003
Chipset VIA KT400 (VT8377) rev. 80
Southbridge VIA VT8237 rev. 0
Sensor chip FFFF
AGP Status enabled, rev. 3.5
AGP Data Transfert Rate 8x
AGP Side Band Addressing supported, not enabled
AGP Aperture Size 128 MBytes
Memory
DRAM Type DDR-SDRAM
DRAM Size 512 MBytes
DRAM Frequency 199.0 MHz
FSB:DRAM FSB + 33 MHz
DRAM Interleave 4-way
CAS# Latency 3.0 clocks
RAS# to CAS# 3 clocks
RAS# Precharge 3 clocks
Cycle Time (TRAS) 6 clocks
# of memory modules 1
Module 0 DDR-SDRAM PC3200 - 512 MBytes
